| Customization: | Available |
|---|---|
| Atomization: | Gas Atomization |
| Flow: | Cross Flow |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TECHNICAL PARAMETER
| Diameter | Length | Capacity | Fan power | Remark |
| Ø1.2M | 9M | 1-2T/H | 22KW | Input raw material's moisture less than 50%, output dried product's moisture less than 15% |
| Ø1.5M | 9M | 2-3T/H | 30/37KW | |
| Ø1.8M | 11M | 4-5T/H | 37/45KW |
1.Inverter control of input and output speed, ensure uniform and stable moisture in the dried sawdust.
2.Explosion-proof function to prevent fire and explosion.
3.Large processing capacity and high heat efficiency. Heat efficiency can reach 60%.
4.The drum with thermal insulation board, the heat efficiency of thermal insulation is over 70%, and the heat efficiency is increased more than 50%.
5.Special board design can increase the touching area between the board and wet sawdust, so can shorten the drying time.
6.After the main drum drying, the end airflow will dry again, on the one hand, the drying efficiency can be improved, and on the other hand, the hot exhaust gas emission can be reduced.
7.With dust collecting system, it can collect dust, and more environmental protection.
8.In the hot stove, will set firewall, so can prevent fire into the drum dryer.
9.There are input and output temperature meter in the electric control cabinet, so can according to the temperature to control the drying time, then control the final dried sawdust's moisture.
){kind=link}